Skip Navigation Links
Home
About UsExpand About Us
Academics
DepartmentsExpand Departments
ResourcesExpand Resources
Placement
Alumni
For ParentExpand For Parent
ActivitiesExpand Activities
Contact Us
NAAC - IQAC
DR. M.R. THANSEKHAR
[10110000]
Professor
Mechanical Engineering
Qualification :B.E.(MECH)., M.E.(THERMAL POWER)., PH.D(MECH.ENGG)
Experience :33.3 (Y.M)
Email ID :thansekhar@gmail.com


Academic Profile
 Nos.
Research Work9
Paper Publication (International)55
Paper Publication (National)16
Resource Person30
Awards / Achievements4
Conference7
Workshop5
FDP7
Short Term Course1
Symposium1
Membership4


Research Work
S.No.TitleFrom DateTo DatePeriodDetails
1. Ph.D Guidance - "Experimental and Numerical Investigation of Thermal Performance of Wavy Microchannel Heat sink with Ceramic Based Nanofluids"01-01-201301-01-202310 yearsPh.D Awarded - Mr.M.Satheeshkumar - Anna University
2. Ph.D Guidance "Numerical Investigation of Fluid Flow and Heat Transfer in Sudden Expansion"01-01-201301-01-202310 yearsPh.D Awarded - Mr.S. Ramanathan - Anna University
3. Ph.D Guidance - "Experimental Investigation of Friction Stir Welding of Dissimilar AA6101-T6 and AA1350 Alloys"01-06-201201-02-20197 yearsPh.D Awarded - Mr.R.Ashokkumar - Anna University
4. Ph.D Guidance - "Numerical Studies on Conjugate Free Convection in Baffle Attached Square Enclosure Using Al2O3/Water Nanofluid "01-01-201201-04-20219 yearsPh.D Awarded - Mr.N.Nagasubramanian - Anna University
5. Ph.D Guidance - "Studies on Effect of Fuel Preheating and Bowl Geometry Modification in DI Diesel Engine with Neem and Pumpkin oil Biodiesels"01-06-201101-02-20209 yearsPh.D Awarded - Mr.R.Muneeswaran - Anna University
6. Ph.D Guidance - "Experimental Investigation of Flow Distribution and Heat Transfer Performance of Fully and Partially Heated Microchannels"01-06-201101-04-20187 yearsPh.D Awarded - Mrs.C.AnbuMeenakshi - Anna University
7. Ph.D Guidance - "Studies on Evolutionary Techniques for the Design Optimization of Machine Elements"01-06-200909-06-20178 yearsAwarded Ph.D Degree -Mr. P.Sabarinath- Anna University
8. Ph.D Guidance - "Effects of Gap Time and Time Balance on Multi-Objective Vehicle Routing Problem With Time Windows"01-06-200901-03-20189Ph.D Awarded - Mr.V.Sivaramkumar, Anna University
9. Natural Convection Inside an Enclosure Filled with Plain or Porous Medium--1997 - 2002Department of Mechanical Engineering, Indian Institute of Technology Madras Chennai


Paper Publication (International)
S.No.TitleFrom DateTo DatePeriodDetails
1. Influence of Ceramic Based Nanofluids and Inlet Header Geometry on the Thermal Performance of Wavy Microchannel Heat Sink24-06-202324-06-20232021Ceramic Processing Research, 22, 6, 679-691, 2021
2. Effect of Al2O3/water nanofluid on conjugate free convection in a baffle attached square enclosure24-06-202324-06-20232020MECHANIKA, 26, 2, pp. 126-133, 2020, KTU
3. A New Method of Acquiring Perquisites of Recirculation and Vortex Flow in Sudden Expansion Solar Water Collector Using Vortex Generator to Augment Hea24-06-202324-06-20232020International Journal of Thermal Sciences, 153, 2020, Elsevier.
4. A New Method of Enhancing Heat Transfer in Sudden Expansion Channel using Vortex Generators With Toe-out and Toe-in Configurations by Acquiring Perqui24-06-202324-06-20232019Journal of Mechanical Science and Technology
5. , Investigating the combined effect of square microgrooves and CNT coating on condensation heat transfer24-06-202324-06-20232019Applied Surface Science, 469, 50-60, 2019, Elsevier.
6. , Role of inter-nanowire distance in metal nanowires on pool boiling heat transfer characteristics, Journal of Colloid and Interface science24-06-202324-06-20232018532, 218-230, 2018, Elsevier.
7. , Evaluating the scale effects of metal nanowire coatings on the thermal performance of miniature loop heat pipe, Applied Thermal Engineering24-06-202324-06-20232018133, 727-738, 2018, Elsevier.
8. Modified surfaces using seamless graphene/carbon nanotubes based nanostructures for enhancing pool boiling heat transfer, Experimental Thermal and Flu24-06-202324-06-2023201896, 493-506, 2018, Elsevier.
9. , Demonstrating the importance of using total time balance instead of route balance on a multi-objective vehicle routing problem with time windows, Th24-06-202324-06-2023201898, 1287-1306, 2018, Springer.
10. Comparative studies on the performance and emissions of a direct injection diesel engine fueled with neem oil and pumpkin seed oil biodiesel with and24-06-202324-06-20232018Environmental Science and Pollution Research, 25, 5, 4621-4631, 2018, Springer.
11. , Mechanical and wear properties of friction stir welded dissimilar AA6101-T6 and AA1350 alloys: Effect of offset distance and number of passes24-06-202324-06-20232018Journal of Mechanical Science and Technology, 32, 7, 3299-3307, 2018, Springer.
12. Reinforcement with alumina particles at the interface region of AA6101-T6 and AA1350 alloys during friction stir welding, Materials Research Express24-06-202324-06-202320185, 4, 046521, 2018, IOP Publishing
13. Heat Transfer Enhancement of Nanofluid Cooled Microchannel Heat Sink, Advanced Science, Engineering and Medicine24-06-202324-06-2023201810, 3, 346-350, 2018, American Scientific Publishers.
14. , Effect of Nanofluid on Flow Distribution in a Microchannel Heat Sink, Advanced Science, Engineering and Medicine24-06-202324-06-2023201810, 3, 411-415, 2018, American Scientific Publishers.
15. On the effectiveness of a nanofluid cooled microchannel heat sink under non-uniform heating condition24-06-202324-06-20232017Applied Thermal Engineering, 113, 1437–1443, 2017, Elsevier.
16. Effect of diameter of metal nanowires on pool boiling heat transfer with FC-72, Applied Surface Science24-06-202324-06-20232017423, 509-520, 2017, Elsevier.
17. Investigation of Thermal Performance of Microchannel Heat Sink with Nanofluids Al2O3/Water and SiO2/Water, Experimental Techniques24-06-202324-06-2023201741, 399-406, 2017, Springer.
18. Property Evaluation of Friction Stir Welded Dissimilar Metals: AA6101-T6 and AA1350 Aluminium Alloys24-06-202324-06-20232017MATERIALS SCIENCE (MEDŽIAGOTYRA), 23, 1, 78-83, 2017, Kauno Technologijos University.
19. Multi-objective vehicle routing problem with time windows: Improving customer satisfaction by considering gap time, Journal of Engineering Manufacture24-06-202324-06-20232017231, 7, 1248-1263, 2017, Sage publications.
20. Experimental investigation of header shape and inlet configuration on flow maldistribution in microchannel, Experimental Thermal and Fluid science24-06-202324-06-2023201675, 156-161, 2016, Elsevier.
21. Effect of diethyl ether addition to palm stearin biodiesel blends on NOx emissions from a diesel engine, Asian Journal of Research in Social Sciences24-06-202324-06-202320166, 9, 1382-1394, 2016, Asian Research Consortium.
22. Multiobjective Design Optimisation of Helical Gear Pair Using Adaptive Parameter Harmony Search Algorithm, Applied Mechanics and Materials24-06-202324-06-20232015813, 1032-1036, 2015, Trans Tech.
23. Energy Conservation by Design Optimisation of Flywheel Using Flower Pollination Algorithm, Journal of Chemical and Pharmaceutical Science24-06-202324-06-202320157, 166-171, 2015, American Chemical Society.
24. Multiobjective optimization method based on adaptive parameter harmony search algorithm, Journal of Applied Mathematics24-06-202324-06-20232015165601, 2015, Hindawi.
25. Reductıon of NOx emıssıon ın bıodıesel (soyabean) fuelled DI dıesel engıne by cetane ımprover, ARPN J. of Eng. and Appl. Sci.,24-06-202324-06-2023201510, 7, 2968-2973, 2015, Asian Research Publishing Network.
26. Numerical investigation of natural convection in a square enclosure with a baffle mounted on vertical wall, Applied Mechanics and Materials24-06-202324-06-20232015813, 748-753, 2015, Trans Tech.
27. Performance Evaluation of Differential Evolution and Particle Swarm Optimization Algorithms for Optimizing Power Loss in a Worm Gear Mechanism, LNEE24-06-202324-06-20232015326, 433-441, 2015, Springer.
28. Response Surface Methodology for Optimum Hardness of TiN on Steel Substrate, International Journal of Chemical, Molecular, Nuclear, Materials and Meta24-06-202324-06-202320159, 12, 1448-1454, 2015, World Academy of Science, Engineering and Technology.
29. Numerical Investigation of Mass Flow Distribution in Wavy Microchannel Heat Sink, Applied Mechanics and Materials24-06-202324-06-20232015813, 52-56, 2015, Trans Tech.
30. Effect of Geometrical Parameters on Flow Mal-Distribution in a Wavy Microchannel, Applied Mechanics and Materials24-06-202324-06-20232015813, 674-678, 2015, Trans Tech.
31. Analysis of the Fluid Flow in 3D Symmetric Enlarged Channel, Applied Mechanics and Materials24-06-202324-06-20232015813, 652-657, 2015, Trans Tech.
32. Effect of Flow Inlet on Flow Distribution in Microchannel Heat Sink, Journal of Chemical and Pharmaceutical Sciences24-06-202324-06-202320157, 194-196, 2015, American Chemical Society.
33. Review on Friction Stir Welding, International Journal of Applied Engineering Research24-06-202324-06-2023201510, 8, 6337-6341, 2015, Research India.
34. Performance Evaluation of Differential Evolution and Particle Swarm Optimization Algorithms for the Optimal Design of Hollow Shaft, International Jour24-06-202324-06-202320159, 26, 8741-8744, 2015, Research India
35. Experimental Investigation of Heat Transfer in coated Microchannels for MEMS Applications, Applied Mechanics and Materials24-06-202324-06-20232015813, 782-786, 2015, Trans Tech.
36. Solving multi-objective vehicle routing problem with time windows by FAGA, Procedia Engineering24-06-202324-06-2023201497, 2176-2185, 2014, Elsevier.
37. Analysis of Flow Mal-Distribution in a Cross-Flow Heat Exchanger, Applied Mechanics and Materials24-06-202324-06-20232014592, 1428-1432, 2014, Trans Tech.
38. Experimental Investigation of the Combined Effect of Coating and Header Combination in Microchannels, Procedia Technology24-06-202324-06-2023201414, 20, 520 – 527, 2014, Elsevier.
39. Corrosion analysis of copper-TiO2 nano composite coatings on steel using sputtering, International Journal of Innovative Research in Science, Engineer24-06-202324-06-202320143,3, 2014, IJIRSET
40. Effect of Nox Emissions in a Bio-Fuelled Di Diesel Engine, International Journal of Innovative Research in Science, Engineering and Technology24-06-202324-06-20232014Engineering and Technology, 3,3, 2014, IJIRSET.
41. Effect of Header Design on Pressure Drop in Microchannel Heat Sink for MEMS Applications, Advanced Materials Research24-06-202324-06-20232014984, 1184-1189, 2014, Trans Tech.
42. Effects of tool pin profile and tool shoulder diameter on the tensile behaviour of friction stir welded joints of aluminium alloys, Advanced Materials24-06-202324-06-20232014984, 586-591, 2014, Trans Tech.
43. A new multi objective genetic algorithm: fitness aggregated genetic algorithm (FAGA) for vehicle routing problem, Advanced Materials Research24-06-202324-06-20232014984, 1261-1268, 2014, Trans Tech.
44. Optimum Design of Disc Brake Using NSGA-II Algorithm, International Journal of Innovative Research in Science, Engineering and Technology24-06-202324-06-202320143,3, 2014, IJIRSET.
45. Multi Objective Design Optimization of two bar truss using NSGA - II and TOPSIS, Advanced Materials Research24-06-202324-06-20232014984, 419-424, 2014, Trans Tech.
46. Performance Evaluation of Differential Evolution and Particle Swarm Optimization Algorithms for the Optimal Design of Closed Coil Helical Spring, Inte24-06-202324-06-20232014Engineering and Technology, 3,3, 2014, IJIRSET.
47. Experimental Investigation Of Flow Maldistribution In Microchannels, International Journal of Innovative Research in Science, Engineering and Technolo24-06-202324-06-202320143,3, 2014, IJIRSET
48. Performance Evaluation of Particle Swarm Optimization Algorithm for Optimal Design of Belt Pulley System24-06-202324-06-20232013LNCS, 8297, 601-616, 2013, Springer.
49. Natural convection in a partially heat generating rod bundle inside an enclosure24-06-202324-06-20232010132, 10,102501, 2010, ASME.
50. Free convection in a vertical cylindrical annulus filled with anisotropic porous medium24-06-202324-06-20232009Thermal science, 13, 1, 37-45, 2009, Vinca Institute of Nuclear Sciences.
51. Finite Element Analysis for Optimal Reinforcement Around the Nozzle Hole Openings in Thin and Thick Walled Pressure Vessel Cylinders, International Jo24-06-202324-06-202320082, 125-133, 2008, SME
52. Optimization of Nozzle Hole Reinforcement Parameters and Wall Thickness in Cylindrical Pressure Vessel Using FEM, Journal of Manufacturing Engineering24-06-202324-06-202320083, 2008, SME.
53. Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: II. Numerical simulation, Nuclear Engineering and Design24-06-202324-06-20232005235, 8, 897-912, 2005, Elsevier.
54. Natural convection in a cylindrical enclosure filled with heat generating anisotropic porous medium, Journal of Heat Transfer24-06-202324-06-20232002124, 1, 203-207, 2002, ASME.
55. Laminar Natural Convection in Cavities Filled with Low Prandtl Number Fluids, International Journal of Transport Phenomena24-06-202324-06-202320013, 63-72, 2001, Old City Publishing.


Paper Publication (National)
S.No.TitleFrom DateTo DatePeriodDetails
1. 3D Finite Element Analysis for optimal Reinforcement Around a pressure vessel opening25-01-200826-01-200825-01-2008 To 26-01-2008First National Conference on Challenges and Innovative Practices in design,Manufacturing and Materials.
2. Numerial Study of Natural Convection in a locally Heated Porous medium03-01-200805-01-200803-01-2008 to 05-01-20088th International ISHMT-ASME Heat and Mass Transfer Conference
3. Natural Convection in a Porous annulus filled with Heat Generating Anisotropic medium11-06-200713-06-200711-06-2007 to 13-06-2007International Conference on advanced Design and Manufacturing
4. Effect of Anisotophy of porous Medium on Free Convention inside a vertical Annulus07-12-200609-12-200607-12-2006 to 09-12-200633rd National and 3rd International Conference on Fluid Mechanics and Fluid Power
5. Computational Fluid Dynamics Analysis of Flow Over an Elliptic Cyclinder29-03-200630-03-200629-03-2006 to 30-03-20063rd National Conference on "Application of Emerging Technologies
6. Natural Convection in a Porous Annulus Filled With Heat Generating Anisotropic Porous Medium--2007International Conference on Advanced Design and Manufacturing,Madurai.
7. Numerical Study of Natural Convection in a Locally Heated Porous Medium--20088th International ISHMT-ASME Heat and Mass Transfer Conference.
8. Natural Convection inside a Square cavity Filled with a Low Prandtl Number Fluid--2000Proceedings of the Fourth ISHMT-ASME Heat and Mass Transfer Conference and 15th National Heat transfer conference, 459-464
9. Convective Heat Transfer in an Anisotropic Heat Generating Porous Medium--2003National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University, Coimbatore
10. Numerical Investigation of Heat Transfer from a Fin Array--2003National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University, Coimbatore
11. Natural Convection in a Cylindrical Cavity Filled with Partially Heat Generating Anisotropic Porous Medium--200330th National Conference on Fluid Mechanics and Fluid Power, 11-13 December 2003
12. Free Convection in a Square Cavity with a Thin Fin on the Cold Wall--2004Natcon.ME 2004 National Conference on Mechanical Engineering
13. Buoyancy Induced Flow in a Partially Partitioned Square Enclosure--2004National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University
14. Natural Convection in a Cavity with Permeable Partitions--200430th National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, Kolkatta.
15. Numerical Investigation of Free Convection in a Locally Heated Porous Enclosure--200430th National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, Kolkatta
16. Effect of Anisotropy of Porous Medium On Free Convection inside a Vertical Annulus--200633rd National and 3rd International Conference on Fluid Mechanics and Fluid Power.


Resource Person
S.No.TitleFrom DateTo DatePeriodDetails
1. Regression Analysis19-10-202219-10-20222022Delivered Guest Lecture on "Regression Analysis" during Five Day Short Term Training Programme on “Design of Experiments for Engineers and Researchers” Jai Shriram Engineering College, Tirupur
2. Thermal Management of Electronic Gadgets – Microchannel Heat Transfer11-05-202111-05-20212021Delivered guest lecture on "Thermal Management of Electronic Gadgets – Microchannel Heat Transfer" during webinar at" Centurion University of Technology and Management, Odisha"
3. Cognitive Learning & Role of Blooms Taxonomy in Education04-03-202104-03-20212021Delivered guest lecture on"Cognitive Learning & Role of Blooms Taxonomy in Education" during AICTE Sponsored STTP on “ An Effective Pedagogy Practice” at "K.L.N. College of Engineering, Pottapalayam Sivagangai"
4. Online Teaching – Flipped Classroom24-06-202024-06-20202020Delivered guest lecture on "Online Teaching – Flipped Classroom" during Webinar at "MAM College of Engineering, Trichy"
5. Computational Fluid Dynamics – An Introduction28-06-201928-06-20192019Delivered guest lecture on "Computational Fluid Dynamics – An Introduction" during Workshop on Application of Computational Fluid Dynamics Techniques in Heat Transfer and Energy Systems at NIT, Trichy.
6. Regression Analysis27-02-201927-02-20192019Delivered guest lecture on " Regression Analysis" during AICTE-QIP Sponsored One Week Short Term on Quantitative Techniques for Optimization in Mechanical Engineering at "Pondicherry Engineering College, Pondicherry"
7. Cooling of PV panel using microchannels30-11-201830-10-20182018Delivered guest lecture on "Cooling of PV panel using microchannel" during Applications of Nanotechnology in Solar Systems at "NIT, Trichy"
8. Multi objective optimization using nontraditional techniques20-11-201820-11-20182018Delivered guest lecture on "Multi objective optimization using nontraditional techniques" during AICTE-QIP Sponsored Two week FDP on “Modeling and Optimization Techniques for Engineering Applications at Alagappa Chettiar Govt. College of Engineering and Technology, Karaikudi.
9. Goal Setting13-07-201813-07-20182018Delivered guest lecture on " Goal Setting" during Orientation Programme at "Alagappa Polytechnic College, Karaikudi"
10. Collaborative Learning07-05-201807-05-20182018Delivered guest lecture on " Collaborative Learning" during AICTE-ISTE sponsored one week training on Pedagogical Innovations and Best Practices for Skill Based Academic Leadership at K.L.N. College of Information Technology, Madurai.
11. Assessment of Outcomes – Best Practices23-04-201823-04-20182018Delivered guest lecture on " Assessment of Outcomes – Best Practices" during "AICTE-ISTE sponsored one week training on Creative Learning and Innovative Teaching Methodologies" at K.L.N. College of Engineering, Madurai
12. Application of Finite Element Analysis in Thermal Systems19-02-201819-02-20182018Delivered guest lecture on "Application of Finite Element Analysis in Thermal Systems" during AICTE-QIP Sponsored FDP on Application of Finite Element Analysis at Alagappa Chettiar Govt. College of Engineering and Technology, Karaikudi.
13. Building and Simulation of CFD Model11-12-201711-12-20172017Delivered gues lecture on"Building and Simulation of CFD Model"duringAICTE sponsored Two Week FDP on Computational Fluid Dynamics in Engineering and Design atSethu Institute of Technology, Kariapatti, Virudhunagar
14. Effective Cooling Technologies for Solar Energy Applications10-11-201710-10-20172017Delivered guest lecture on"Effective Cooling Technologies for Solar Energy Applications"at Pondicherry Engineering college, Pondicherry
15. Energy conservation in Mechanical Equipments12-10-201712-11-20172017Delivered guest lecture on"Energy conservation in Mechanical Equipments "during Promotion of Energy Audit and Conservation of Energy at district industries centre, nagercoil.
16. Energy conservation in Mechanical Equipments10-10-201712-10-20172017Delivered guest lecture on "Energy conservation in Mechanical Equipments"during Three days training Programme on Promotion of Energy audit and Conservation of Energy at District Industries Centre(DIC), Sivaganga & K.L.N.C.E.
17. Introduction to Research22-09-201722-09-20172017Delivered guest lecture on "Introduction to Research"during IIPC Sponsored Workshop on Research Problem Identification and Technical Paper writing at K.L.N. College of Engineering, pottapalayam ,sivagangai.
18. Thermal Management Techniques for Fuel Cells20-07-201620-07-20162016Delivered guest lecture on "Thermal Management Techniques for Fuel Cells"during TEQIP – II Sponsored one week Faculty Development Programme on Future Trends in Green energy at Alagappa Chettiar Government College of Engineering and Technology (ACGCET), Karaikudi
19. Recent Advances in computational fluid dynamics29-03-201629-03-20162016Delivered guest lecture on "Recent Advances in computational fluid dynamics" during Invited lecture at Anna University Regional Centre- Madurai Campus
20. Computational Fluid Dynamics06-12-201306-12-20132013Delivered guest lecure on"Computational Fluid Dynamics"during AICTE sponsored FDP on Advanced CFD in Green Technology at Sethu Institute of Technology, Virudhunagar
21. Heat Transfer and Heat Exchangers20-02-201321-02-20132013Delivered guest lecture on "Heat Transfer and Heat Exchangers"during Employee Development Programme at NTPC Ltd, Ramagundam, Andrapradesh.
22. Awareness for students on Engineering Counseling17-07-201217-07-20122012Delivered guest lecture on "Awareness for students on Engineering Counseling" during Awareness Programme by Tamilnadu Government at Union Office, T. Kallupatti, Madurai
23. Introduction to Flow Simulation20-03-201220-03-20122012Delivered guest lecture on "Introduction to Flow Simulation" during Invited Lecture at Madurai Institute of Engineering and Technology, Madurai.
24. "Introduction to Flow Simulation"20-03-201220-03-201220-03-2012Delivered a Guest Lecture on "Introduction to Flow Simulation" at Madurai Institute of Engineering Technology, Madurai.
25. "Creativity and Innovation"30-10-201030-10-201030-10-2010Delivered a Guest Lecture on "Creativity and Innovation" during the Induction Training progrramme for Teachers at KLN College of Engineering, Chennai
26. Refrigeration – Current Issues and Future Challenges12-03-201012-03-2010one day“Refrigeration – Current Issues and Future Challenges” at SSN College of Engineering, Chennai, on 12th March 2010
27. Computational Fluid Dynamics17-09-200917-09-20092009Delivered guest lecture on "computational fluid dynamics" at B.S. Abdur Rahman University, Chennai.
28. Introduction to CFD13-03-200913-03-20092009Delivered guest lecture on "Introduction to CFD" during Workshop on “Flow Simulation- Concepts and Computational Fluid Dynamics" at SSN College of Engineering, Chennai
29. Computational Fluid Dynamics29-08-200829-08-20082008Delivered a lecture on "Computational Fluid Dynamics" during Two Day Workshop on “Recent Trends in Manufacturing and thermal"at Anand Institute of Higher Technology, Chennai.
30. Modeling of Porous Media24-10-200224-10-20022002Delivered guest lecture on "Modeling of Porous Media" during Three Day Workshop on Computational Fluid Dynamics at Sri Venkateswara College of Engineering, Chennai.


Awards / Achievements
S.No.TitleFrom DateTo DatePeriodDetails
1. Best Paper Award30-05-202030-05-20202020“On the effectiveness of conjugate heat transfer enhancement by hybrid nanofluids in the presence of baffle inside the square enclosure” in International Conference on recent trends in Engineering and Scientific Technology(ICTEST 2020), at Rathinam Technical Campus, Coimbatore, during 30th May 2020
2. Best Paper Award06-04-201707-04-20172017“Effect of Nanofluid on Flow Distribution in a Microchannel Heat Sink” in Second International Conference on Mechanical and Manufacturing Engineering (ICMME 2017) at Sri Chandrashekrendra Saraswathi Viswa Mahavidhyala University, Kanchipuram during 6th & 7th April 2017.
3. Best Paper Award07-03-201408-03-20142014“A New Multi objective Genetic Algorithm: Fitness Aggregated Genetic Algorithm (FAGA) for Vehicle Routing Problem” in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments(ICRAMID –2014) at Ponjesly College of Engineering, Nagercoil during 7th -8th March 2014.
4. Best Paper Award07-03-201408-03-20142014“Effect of Header Design on Pressure Drop in Microchannel Heat Sink for MEMS Applications” in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014) at Ponjesly College of Engineering, Nagercoil during 7th -8th March 2014.


Conference
S.No.TitleFrom DateTo DatePeriodDetails
1. served as a session chair in "Two Day International Conference on Sustainable Energy Solutions for a Better Tomorrow [SESBT 2021]"23-07-202124-07-20212 daysTwo Day International Conference on Sustainable Energy Solutions for a Better Tomorrow [SESBT 2021], VIT Chennai, in collaboration with ESRIG, University of Groningen, Netherlands, 23 & 24 July 2021
2. served as a session chair in ''Second International Conference on Sustainable Energy Resources, Materials and Technologies (ISERMAT 2019)''14-03-201915-03-20192 daysSecond International Conference on Sustainable Energy Resources, Materials and Technologies (ISERMAT 2019), SSN College of Engineering, Chennai, 14th& 15th March 2019
3. served as a session chair in "International Conference on Emerging Trends in Engineering and Technology(ICETET’16)"11-05-201612-05-20162 daysInternational Conference on Emerging Trends in Engineering and Technology(ICETET’16), Pandian Saraswathi College of Engineering, Sivagangai, 11th& 12th May 2016
4. served as session chair in "International Conference on Sustainable Energy Resources, Materials and Technologies(ISERMAT 2015)"08-01-201509-01-20152 daysInternational Conference on Sustainable Energy Resources, Materials and Technologies(ISERMAT 2015), SSN College of Engineering, Chennai, 8th&9th January 2015
5. served as a session chair ''International Conference on Modelling Optimization and Computing(ICMOC 2014)''10-04-201411-04-20142 daysInternational Conference on Modelling Optimization and Computing(ICMOC 2014), Noorul Islam University, Kanyakumari,10th&11th April 2014
6. Convenor - “International Conference on Innovations in Engineering and Technology (ICIET’14)”21-03-201422-03-20142 days“International Conference on Innovations in Engineering and Technology (ICIET’14)” at K.L.N. College of Engineering, Madurai on 21st& 22nd March 2014
7. served as a session chair "International Conference on Thermal Engineering (INCOTE 2011),Kalasalingam University, Srivilliputhur, 2011"08-11-201109-10-20112 daysInternational Conference on Thermal Engineering (INCOTE 2011),Kalasalingam University, Srivilliputhur, 2011


Workshop
S.No.TitleFrom DateTo DatePeriodDetails
1. Two Day Workshop on Applications and Research Issues in Thermal Engineering13-09-201314-09-20132 days“Two Day Workshop on Applications and Research Issues in Thermal Engineering” at K.L.N. College of Engineering, Madurai, during 13th - 14th September 2013
2. FEA Applications in Strength of Materials29-09-201130-09-20112 days“FEA Applications in Strength of Materials” at K.L.N. College of Engineering, Madurai during 29th – 30th September 2011
3. Two day workshop on Applications of Computational Fluid Dynamics09-09-201110-09-20112 days''Two day workshop on Applications of Computational Fluid Dynamics" at K.L.N. College of Engineering, Madurai, during 9th - 10th September 2011
4. Two day Workshop on Research Methodology23-09-201024-09-20102 days“Two day Workshop on Research Methodology” at K.L.N. College of Engineering, Madurai during 23rd – 24th September 2010
5. Three Day Workshop on Computational Fluid Dynamics24-10-200226-10-20022 days“Three Day Workshop on Computational Fluid Dynamics” at Sri Venkateshwara College of Engineering, Chennai, during 24th - 26th October 2002


FDP
S.No.TitleFrom DateTo DatePeriodDetails
1. Three Day Faculty Development Programme on Enhancing the Quality of Academic and Sponsored Research04-06-202006-06-20203 days“Three Day Faculty Development Programme on Enhancing the Quality of Academic and Sponsored Research”, at K.L.N. College of Engineering, Madurai, 4th June 2020 to 6th June 2020
2. Two Day Faculty Development Programme on ANSYS –CFD03-02-201704-03-20172 days“Two Day Faculty Development Programme on ANSYS –CFD” at K.L.N. College of Engineering, Madurai, 3rd& 4th March 2017
3. Awareness Programme on Outcome Based Accreditation05-05-201406-05-20142 days“Awareness Programme on Outcome Based Accreditation” at K.L.N. College of Engineering, Madurai, 5th& 6th May 2014
4. Two Week FDP on Teaching Methodology for Machine Design29-04-201312-05-201313 days“Two Week FDP on Teaching Methodology for Machine Design” at K.L.N. College of Engineering, Madurai, during 29th April 2013 to 12th May 2013
5. Faculty Development Training Programme on Heat and Mass Transfer03-12-201210-12-20127 daysAnna University Sponsored “Faculty Development Training Programme on Heat and Mass Transfer” at K.L.N. College of Engineering, Madurai, during 3rd - 10th December 2012
6. Flow Simulation – Concepts and Applications13-03-200913-03-2009one day"Flow Simulation – Concepts and Applications” at SSN College of Engineering, Chennai, on 13th March 2009
7. Two Day Workshop on Fuel Cells05-03-200406-03-20042 days“Two Day Workshop on Fuel Cells” at Sri Venkateshwara College of Engineering, Chennai, on 5th& 6th March 2004


Short Term Course
S.No.TitleFrom DateTo DatePeriodDetails
1. Co-ordinator - one week STTP on “Innovative techniques for sustainable energy development through modeling of mechanical processes”03-08-202024-08-202018 daysAICTE Sponsored one week STTP on “Innovative techniques for sustainable energy development through modeling of mechanical processes”, at K.L.N. College of Engineering, Madurai, Series –I (3rd to 8th August 2020), Series – 2 (14th to 19th September 2020) and Series – 3 (19th to 24th October 2020)


Symposium
S.No.TitleFrom DateTo DatePeriodDetails
1. Convenor - National level Students Technical Symposium (IMPELZ’10)08-09-201008-09-2010one day“National level Students Technical Symposium (IMPELZ’10)” at K.L.N. College of Engineering, Madurai on 8th September 2010


Membership
S.No.TitleFrom DateTo DatePeriodDetails
1. serving as a member of board of studies in the department of mechanical engineering01-10-201601-05-20193 yearsServed as a member in Board of Studies for the Department of Mechanical Engineering, in Anna University, Chennai for Approval of Regulation 2017, during October 2016 to May 2019 (3 years).
2. Served as a member in Board of Studies for the Department of Mechanical Engineering, in Anna University, Chennai01-05-201301-05-20163yearsServed as a member in Board of Studies for the Department of Mechanical Engineering , in Anna University, Chennai for Approval of Regulation 2013, during May 2013 to May 2016 (3 years).
3. Served as a member in Board of Studies for the Department of Mechanical Engineering01-04-201101-04-20121 yearServed as a member in Board of Studies for the Department of Mechanical Engineering , in Anna University of Technology, Chennai for Approval of Direct Study –Ph.D. Course work, during April 2011 to April 2012(1 year)
4. Served as a member in Academic Council for Madurai Kamaraj University,01-01-199601-01-19971 yearServed as a member in Academic Council for Madurai Kamaraj University, during 1996-1997

Home | Site Map | Photo Gallery | Downloads | Useful Links | RTI | Contact Us | Grievances | Search
Developed & Maintained by: ISSG (Information Systems Support Group), K.L.N. COLLEGE OF ENGINEERING.
Copyright © 2023 K.L.N. COLLEGE OF ENGINEERING. All rights reserved.
Site Best viewed in Mozilla Chrome, Firefox & Opera